1921 Series two-component acrylic adhesive
Product features
application:
Used in metal and plastic (PP, PC, pet, etc.) Bonding: mainly used in electrical appliances, automobile, construction, consumer goods, electronic products, transportation, metal processing, sporting goods, composite materials, electronics, metal welding, general industry:
Features and advantages:
? Two-component solvent-free acrylic adhesive;
? Normal temperature curing, low shrinkage, ultra-strong adhesion relay, in the precision cycle to meet the requirements of the process, with good water resistance:
? The material has high stability and slow thermal conductivity, and meets the requirements for a long time.EIGENVALUE
| characteristic | 1000-1921 acrylic adhesive | standard test |
| colour | A component: light blue / B component: yellowish brown | Visually |
| Viscosity (25°C) | A component: 5～8 Pa.S / B component: 8～11 Pa.S | ASTM D2196 |
| proportion | 1.16 g/cm3 | ASTM D792 |
| Volume resistance | 10 12 Ω · CM | ASTM-D257 |
| Breakdown voltage (1mm) | ≥5 KV | ASTM D149 |
| Shear strength | ＞8 MPa | ASTM D412-1998A |
| Peel strength | ＞0.4 kgf/mm | GB/T 18746 |
| Heat distortion temperature | ≥120℃ | EN344 |
| hardness | ≥80 Shore 00 | ASTM D2240 |
| Curing condition | ||
| Surface drying time (25°C) | 6 ～ 11 min | / |
| Curing time (25°C) | ≥60 mi | / |
| Note: The data recorded in this TDS are representative values ??rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this TDS is only an example. The product can have various application scenarios and environments, which are beyond our control. Therefore, you need to make your own sufficient before using the product to determine whether the product is suitable for your production process and conditions. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the use described in this TDS will not cause any patent infringement. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes. The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali cannot be held responsible for products that are contaminated or stored under non-instructed conditions. | ||